Base de connaissances

Poweredge C2100 foreign config found and volume/data inaccessible - Unconfigured foreign/Unconfigured bad



Article Summary: This article provides information on Poweredge C2100 foreign config found and volume/data inaccessible - Unconfigured foreign/Unconfigured bad.



Question

A PowerEdge™ C2100 may display a foreign configuration found and volume/data inaccessible - Unconfigured foreign/Unconfigured bad.

Occasionally a MegaRAID or SAS controller volume will list the drive members as 'Unconfigured foreign' or 'Unconfigured bad', and the volume will be inaccessible. It is possible to repair the Volume and keep the data intact using the MegaRAID or SAS controller WebBIOS.

LSI MegaRAID™ and LSI SAS™ controllers.


Answer

Steps to resolve.
  1. Reboot the system.
  2. Go into LSI WebBIOS by entering alt-h at boot time when prompted.
  3. Click on a 'Unconfigured bad' drive from front screen of WebBIOS.
  4. On the next screen, you will see an option to make 'Unconfigured good'. Select that option. Do not select any other option(s).
  5. Repeat for all drive(s) in the volume.
  6. Now you are back on the front page.
  7. Click Scan device-->It will ask you if you want to import the found foreign configuration. Preview, if looks right, then go ahead and import the configuration.
  8. Reboot and the volume and its data should be accessible.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID de l'article : SLN118625

Date de la dernière modification : 01/10/2014 12:00 AM


Noter cet article

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
Oui Non
Envoyez-nous vos commentaires
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\
Désolé, notre système de collecte des commentaires est actuellement indisponible. Veuillez réessayer ultérieurement.

Merci pour vos commentaires.