Base de connaissances

Handling guide for docking the Venue 11 Pro



Handling guide for docking the Venue 11 Pro


Docking the Venue 11 Pro

  • DO NOT tilt the Venue forward towards yourself
  • DO NOT release the Venue until it touches the supporting stand
  • DO NOT use any force should it not slide in properly, instead lift it straight up, check the connectors for any obstacles and start over
  • Make sure the docking station is on a horizontal, flat surface
  • Hold the Venue with both hands at the sides in landscape orientation
  • Plug the Venue at a 90° angle to the desk surface
  • Tilt the Venue backwards until it touches the supporting stand


Undocking the Venue 11 Pro

  • DO NOT tilt the Venue forward over the 90° angle
  • DO NOT use any force when tilting
  • Grab the Venue with both hands on the sides
  • Gently tilt the Venue forward until a maximum of 90° angle to the desk surface
  • Lift the Venue straight up





Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID de l'article : SLN295100

Date de la dernière modification : 04/28/2015 11:25 AM


Noter cet article

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
Oui Non
Envoyez-nous vos commentaires
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\
Désolé, notre système de collecte des commentaires est actuellement indisponible. Veuillez réessayer ultérieurement.

Merci pour vos commentaires.