Knowledge Base

How to view Exchange 2010 certificate properties through Exchange Management Console and PowerShell

Article Summary: This article provides information about how to view Exchange 2010 Certificate properties through Exchange Management Console and PowerShell

In the console tree, click Server Configuration.

Select the server that contains the certificate, and then select the certificate you want to view.

From the action pane, click Open.

You can view information about the certificate on the General, Details, and Certification Path pages of the Exchange Certificate dialog box.

Using PowerShell you would use the following command to view the porpeties of the Certificate

Get-ExchangeCertificate 0271A7F1CA9AD8A27152CCAE044F968F068B14B8 | fl

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN285650

Last Date Modified: 10/29/2014 01:26 PM

Rate this article

Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.