Knowledge Base

Missing Character Models When Playing Company Of Heroes on the Inspiron 537/537s - Product Support Quick Note (PSQN) - 357458




Missing Character Models When Playing Company Of Heroes on the Inspiron 537/537s

When running Company of Heroes for the first time on the Inspiron 537 or 537s using the onboard Intel G41 graphics controller, the games character models will be missing (Figure 1 and Figure 2).


Figure 1: Example of the Missing Character Models in Company of Heroes II


Figure 2: Example of Normal Graphics in Company of Heroes II

The missing character models will return once the resolution is changed within the game. For information on how to change the resolution within Company of Heroes, please refer to THQ's Support page.

Once a permanent solution is available, this article will be updated.



Do Not Replace Any Hardware

Do not replace any hardware.



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN33056

Last Date Modified: 08/12/2010 12:00 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.