Consulta de temas

Handling guide for docking the Venue 11 Pro



Handling guide for docking the Venue 11 Pro


Docking the Venue 11 Pro

  • DO NOT tilt the Venue forward towards yourself
  • DO NOT release the Venue until it touches the supporting stand
  • DO NOT use any force should it not slide in properly, instead lift it straight up, check the connectors for any obstacles and start over
  • Make sure the docking station is on a horizontal, flat surface
  • Hold the Venue with both hands at the sides in landscape orientation
  • Plug the Venue at a 90° angle to the desk surface
  • Tilt the Venue backwards until it touches the supporting stand


Undocking the Venue 11 Pro

  • DO NOT tilt the Venue forward over the 90° angle
  • DO NOT use any force when tilting
  • Grab the Venue with both hands on the sides
  • Gently tilt the Venue forward until a maximum of 90° angle to the desk surface
  • Lift the Venue straight up





Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identificación del artículo: SLN295100

Última fecha de modificación: 04/28/2015 11:25 AM


Califique este artículo

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
No
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Muchas gracias por sus comentarios.