Knowledge Base

Latitude E5250/E5450/E5550/E7250/E7450 with Blanking, Flickering or Blinking Video on External Monitors when Connected to Docking Stations


This article provides information on issues regarding flickering video along with troubleshooting steps and driver links to resolve the issue.


Flickering/Blinking video on external monitors

Dell Latitude E5250 / E5450 / E5550 / E7250 / E7450 may encouter video flickering / blinking when connecting to a docking station attached to dual external monitors. The video will blink intermittently for about 2-3 seconds at a time throughout the day when connected to the DisplayPort (DP), Digital Video Interface (DVI), or Video Graphics Array (VGA) cable connections.

Docking station part numbers reported with the issue.

  • CPGHK - E-Port Docking Station
  • 8RNJ7 - Older E-Port Docking Station
  • 35RXK - E-Port Plus
  • JKJ9X - E-Port Plus II



Recommended troubleshooting steps

  1. Reseat video cables to docking station.
  2. Check refresh rate and resolution of monitors - for instruction please view our article Adjust the Screen Resolution, Color Depth, Refresh Rate and Size of Fonts and Icons
  3. Ensure the BIOS revision is up to date by visiting the Dell Drivers & Downloads page, updating to the latest version available.
  4. Also, update to the latest Video Driver by visiting the Dell Drivers & Downloads page, updating to the latest version available.
  5. Update to the latest MST HUB Firmware by visiting the Dell Drivers & Downloads page, updating to the latest version available.
    Note: In order to flash the MST HUB, the latest video driver needs to be installed and the system must be docked with an active external monitor connected.

Should these steps not fully resolve the issue, please contact Dell Technical Support.



Article ID: SLN298095

Last Date Modified: 04/20/2017 03:26 AM


Related Articles

Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Feedback shows invalid character, not accepted special characters are <> () &#92;
Sorry, our feedback system is currently down. Please try again later.

Thank you. Your feedback has been sent.