Edit the Registry to Modify the COM Port Setting
NOTICE: The following procedure contains information about editing the Windows registry. Dell does not guarantee success or support these actions. Any use of the information provided herein, is performed at your own risk. You should make a backup copy of the registry files prior to executing any of the following steps. Incorrect use of the registry editor and editing the registry files can cause serious problems that may require a complete reinstall of your operating system. Dell assumes no responsibility, expressed or implied, regarding the consequences of any action taken as a result of the information provided herein.
To change the COM port setting for the 3Com® PCI 56K modem, modify the registry:
Before performing the steps below, try setting the communication software to COM 3.
This article describes how to change the COM port setting for 3Com PCI 56K modems (Controller based modem). Currently, neither the 3Com control panel nor the modem icon within the Microsoft® Windows® Control Panel provide a way to change the COM port setting. As long as the IRQ used by the modem does not conflict with another device, you should not need to change the IRQ. Even though IRQs were once hard-coded to certain COM ports with legacy ISA modems, they are no longer. You may need to change the COM port setting when a communication program is unable to address the modem on what used to be a non-standard port, such as COM 5. Before performing the steps below, try setting the communication software to COM 3. If this does not help, then try the below procedure to change the COM port in the registry.
Identificación del artículo: SLN66869
Última fecha de modificación: 07/31/2010 12:00 AM