Knowledge Base

024-362 IOT Start Image Marking Time-out Error on the Dell 2155cn/cdn Laser Printer


Article Summary: This article provides Information on 024-362: IOT Start Image Marking Time-out Error on the Dell 2155cn/cdn Laser Printer


Table of Contents:
  1. 024-362: IOT Start Image Marking Time-out Error on the Dell 2155cn/cdn Laser Printer



1.

024-362: IOT Start Image Marking Time-out Error on the Dell 2155cn/cdn Laser Printer


  1. Turn off the Printer and remove the communication cables (USB or Ethernet, depending on Set-Up)


  2. Power the Printer on and Print a System Settings Report


  3. If the error recurs download the latest Firmware from the Dell Support Site


  4. NOTE: Do Not turn off the Printer while the Firmware update is being applied as it may damage the controller card in the Printer, follow the on-screen instructions carefully.

  5. Print another System Settings Report and verify if error has recurred


  6. If the error has recurred, please contact Dell via the Twitter button, to advise of a technical fault

Back to Top

If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.

 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Artikel-id: SLN286266

Laatste wijzigingsdatum: 05/11/2016 12:49 PM


Beoordeel dit artikel

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
Ja Nee
Stuur ons feedback
Feedback bevat ongeldig teken, speciale tekens die niet worden geaccepteerd zijn <> () &#92;
Excuses, ons feedbacksysteem is momenteel offline. Probeert u het later nog eens.

Dank u. Uw feedback is verzonden.