Knowledge Base

OptiPlex 7020 displaying no video through the DisplayPort connection using a dual-monitor configuration



This article provides a resolution for the OptiPlex 7020 displaying no video through the DisplayPort connection using a dual-monitor configuration.


OptiPlex 7020 displaying no video through the DisplayPort connection using a dual-monitor configuration

When the OptiPlex 7020 is configured with a dual-monitor configuration, no video may occur when using the DisplayPort connection. This issue has been seen using a Dell 1914SC monitor, and using both the VGA and DisplayPort connections. If using a DisplayPort to DVI adapter to connect the monitor, video appears correctly.


Install the latest Intel HD Graphics driver to resolve the issue

To resolve this issue, download the latest Intel HD Graphics driver software from Dell's Support Website. Go to the Downloads & drivers section and locate the latest Intel HD graphics driver under the Video category. It is recommended you uninstall the current Intel HD graphics driver then download and install the latest driver.





Artikel-id: SLN297738

Laatste wijzigingsdatum: 11/27/2017 10:44 AM


Beoordeel dit artikel

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
Ja Nee
Stuur ons feedback
Opmerkingen mogen geen speciale tekens bevatten: <>() \
Excuses, ons feedbacksysteem is momenteel offline. Probeert u het later nog eens.

Hartelijk dank voor uw feedback.