Knowledge Base

Issue Starting/Using built-in Windows 10 component





This article provides the information on "Issue Starting/Using built-in Windows 10 component".


Issue Starting/Using built-in Windows 10 component.

Many parts of Windows 10 are implemented as system apps. This includes the Start Menu, Settings, Cortana, Microsoft Edge, Action Center and other Windows components. If any of these functions are not responding, follow the steps below to resolve.


Solution.
  1. Open a Command window started as Administrator by typing: cmd on the search bar then right-clicking or tap and hold then select Run as Administrator from the drop down list.
  2. Repair corruption using the following command:
    dism /online /cleanup-image /restorehealth then press the Enter key.
  3. If this command reports problems that cannot be fixed, stop here. There may be a memory or hard drive issue. Windows needs to be Reset to repair the damage.
  4. Run this command next:
    Sfc /scannow then press the Enter key.
  5. As above, if this reports problems that cannot be fixed, stop here. There may be a memory or hard drive issue. Windows needs to be Reset to repair the damage.
  6. Now run these two commands:
    PowerShell -ExecutionPolicy Unrestricted then press the Enter key.
    Get-AppXPackage -AllUsers |Where-Object {$_.InstallLocation -like "*SystemApps*"} | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}then press the Enter key.
  7. Watch for red errors, which could indicate a problem which cannot be repaired. If you see errors, Windows needs to be reset to repair the damage.

Artikel-id: SLN298640

Laatste wijzigingsdatum: 11/27/2017 02:47 PM


Verwante artikelen

Beoordeel dit artikel

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
Ja Nee
Stuur ons feedback
Opmerkingen mogen geen speciale tekens bevatten: <>() \
Excuses, ons feedbacksysteem is momenteel offline. Probeert u het later nog eens.

Hartelijk dank voor uw feedback.