Knowledge Base

The Trusted Platform Module (TPM) on this computer doesn’t work with the current BIOS, BitLocker error





This article provides the information on "The Trusted Platform Module (TPM) on this computer doesn’t work with the current BIOS, BitLocker error".


Trusted Platform Module (TPM) error after imaging.

A Venue 11 Pro 7140 user reported they encountered a BitLocker error that states: "The Trusted Platform Module (TPM) on this computer doesn’t work with the current BIOS. Contact the computer manufacturer for BIOS upgrade instructions."

This issue occurs if the system is imaged with a Legacy BIOS configuration.

NOTE: While it was reported on a Venue 11 Pro 7140, this issue may occur on any UEFI capable system.

Image system with UEFI BIOS configuration.

For systems requiring BitLocker functionality, the system must have the operating system image installed with the BIOS configured in the default Unified Extensible Firmware Interface (UEFI) mode.

When the operating system is installed in the Legacy BIOS mode for legacy support, BitLocker functionality is not available.

For more information on the requirements for BitLocker see: BitLocker Frequently Asked Questions (FAQ)



Artikel-id: SLN299058

Laatste wijzigingsdatum: 09/15/2017 09:46 AM


Beoordeel dit artikel

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
Ja Nee
Stuur ons feedback
Opmerkingen mogen geen speciale tekens bevatten: <>() \
Excuses, ons feedbacksysteem is momenteel offline. Probeert u het later nog eens.

Hartelijk dank voor uw feedback.