Kunnskapsbase

How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer


Table of Contents:

  1. How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer

This article provides information on "How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer"


1. How to Remove, Reseat or Replace the Fuser on the 3130cn / 3130cdn Dell Laser Printer

  1. Switch the printer off, open the front cover.
  2. Locate the duplex gate.



  3. Locate the gray fuser retention clips.



  4. Slide the fuser unit forward.

  5. Then lift to remove.

Perform the steps in reverse order to reseat or replace the fuser unit.

More info can be found in the 3130cn User’s Guide.

If these steps do not correct the problem, please contact Dell Technical Support.

Back to Top



Artikkel-ID: SLN284839

Dato sist endret: 08/03/2015 02:04 PM


Vurder denne artikkelen

Nøyaktig
Nyttig
Brukervennlig
Var denne artikkelen nyttig?
Ja Nei
Send oss tilbakemelding
Tilbakemelding viser ugyldig tegn, ikke godkjente spesialtegn er <> () &#92;
Beklager, men tilbakemeldingssystemet vårt er nede for øyeblikket. Prøv igjen senere.

Takk. Meldingen er sendt.