Kunnskapsbase

How to Adjust the Scanner Registration on the 3333dn / 3335dn Dell Laser Printers


Table of Contents:

  1. How to Adjust the Scanner Registration on the 3333dn / 3335dn Dell Laser Printers

This article provides information on "How to Adjust the Scanner Registration on the 3333dn / 3335dn Dell Laser Printers"


1. How to Adjust the Scanner Registration on the 3333dn / 3335dn Dell Laser Printers

Scanner Registration is a process to align the scan area with the paper location. To manually adjust the scanner registration:

  1. Turn the printer off.
  2. Clean the scanner glass and backing material.
  3. Hold down 3 and 6 until the progress bar appears.
  4. Release the buttons.

    The printer performs a power‑on sequence, and then the Diagnostic menu appears.

  5. Touch the up or down arrow until Scanner Test appears.
  6. Touch Scanner Test.
  7. Touch the up or down arrow until Scanner Manual Registration appears.
  8. Touch Scanner Manual Registration.
  9. Touch the left and right arrows to change the settings.
  10. Touch Submit.

More information can be found in the 3333dn / 3335dn User's Guide.

If these steps do not correct the problem, please contact Dell Technical Support.


Back to Top




Artikkel-ID: SLN299144

Dato sist endret: 09/21/2015 07:52 AM


Vurder denne artikkelen

Nøyaktig
Nyttig
Brukervennlig
Var denne artikkelen nyttig?
Ja Nei
Send oss tilbakemelding
Kommentarer kan ikke inneholde disse spesialtegnene: <>()\
Beklager, men tilbakemeldingssystemet vårt er nede for øyeblikket. Prøv igjen senere.

Takk for tilbakemeldingen.