Kunnskapsbase

Paper Tray Hard to Remove Dell™ Multi-Function Printer 1125 - Product Support Quick Note (PSQN) - 326862




Paper tray is hard to remove on the Dell™ Multi-Function Printer 1125.

By design, the paper tray on the Dell Multi-Function 1125 laser printer fits very snugly into the printer base. This is intended to keep the tray from dislodging accidently or falling out when the printer is moved.



Remove the paper tray from the Dell™ Multi-Function Printer 1125.

Use these steps to remove the paper tray from the Dell Multi-Function Printer 1125:

  1. Remove the tray cover and any paper in the tray (Figure 1).



    Figure 1: Remove the cover and paper from the tray
  2. Position your left hand on the top of the printer and with the right hand, pull firmly from the right side of the tray in the direction of the arrow (Figure 2).



    Figure 2: Brace the printer and firmly pull the tray from the right side as shown



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Artikkel-ID: SLN38132

Dato sist endret: 06/17/2009 12:00 AM


Vurder denne artikkelen

Nøyaktig
Nyttig
Brukervennlig
Var denne artikkelen nyttig?
Ja Nei
Send oss tilbakemelding
Kommentarer kan ikke inneholde disse spesialtegnene: <>()\
Beklager, men tilbakemeldingssystemet vårt er nede for øyeblikket. Prøv igjen senere.

Takk for tilbakemeldingen.