Base de conhecimento

Unable to select Legacy boot options in the Inspiron 20 (3043) all in one system





This article provides the information on "Inspiron 20 (3043) all in one system users have encountered the inability to select legacy boot options in the system BIOS".


Unable to select Legacy boot options.

An Inspiron 20 (3043) system user was unable to select any Legacy boot options in their system.

Secure Boot was disabled, yet the cursor skipped the legacy boot options which were grayed out.


Update the system BIOS

After installation of the Inspiron 20 (3043) A12 BIOS update (Click the hyperlink to go to the download page, Drivers and downloads, BIOS Section and download the A12 or later BIOS update) The Load Legacy Option Rom setting became available after turning off the Secure Boot option.

Once Legacy Option Roms was enabled, the following options became available in the one-time-boot menu. (The USB option didn't show up till I plugged in a USB drive).



ID do artigo: SLN297179

Data da última modificação: 06/24/2016 08:50 AM


Rate this article

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
Sim Não
Envie seus comentários
Os comentários não podem conter estes caracteres especiais: <>()\
Infelizmente, o nosso sistema de feedback está atualmente desativado. Tente novamente mais tarde.

Agradecemos o feedback.