Base de conhecimento

How To Pull a Snapshot from an ML6000




Answer: *NOTE: Prior to logging into the Web Interface, ensure the browser Pop-Up Blocker has been disabled, and the Web Interface is listed as a Trusted Site

Login to the Web Interface with the proper credentials. (Default login: Admin/Password)

Go to the Tools Menu and Select Capture Snapshot:



From the Tools - Capture Snapshot menu, under the "Select Delivery Method:" heading, choose the "Download the file using the browser" radio button and hit Apply:



Once the Snapshot has finished collecting, you will get the option to Save or Cancel the log. Hit Save. The file will download and will appear as:



snapshot-MM_DD_YY-HHMMSS_Firmware.Rev_LibrarySerialNumber.tar

For Example:

snapshot-03_30_09-160513_520G[1].GS003_A0C1234567.tar Question: How Do I Pull A Snapshot From An ML6000?
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID do artigo: QNA24052

Data da última modificação: 09/29/2015 02:46 PM


Rate this article

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
Sim Não
Envie seus comentários
Os comentários não podem conter estes caracteres especiais: <>()\
Infelizmente, o nosso sistema de feedback está atualmente desativado. Tente novamente mais tarde.

Agradecemos o feedback.