When the toner cartridge is near the end of its life, white streaks or light print occurs. The LCD displays the warning message, Toner Low. Thoroughly shake the cartridge from side-to-side 5 or 6 times to distribute the toner evenly inside the cartridge and temporarily improve print quality.
This is not intended to be a long term method of correction, but meant to assist your printing needs until you obtain a new cartridge assembly.
Open the front cover.
Pull the toner cartridge out.
Thoroughly shake the cartridge from side-to-side 5 or 6 times to distribute the toner evenly inside the cartridge.
If toner comes into contact with your clothing, wipe the toner off with a dry cloth and wash your clothing in cold water. Hot water sets toner into fabric.
Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.
Holding the toner cartridge by the handle and slowly insert the cartridge into the opening in the printer.
Tabs on the sides of the cartridge and corresponding grooves within the printer will guide the cartridge into the correct position until it locks into place completely.
Close the front cover. Ensure that the cover is surely closed.
Click the button below to Tweet feedback or request assistance on anything in the above article.
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.
Код статьи: SLN286283
Дата последнего изменения: 12/20/2013 12:00 AM
Оцените эту статью
Помогла ли вам эта статья?
Отправьте нам свое мнение
Отзыв содержит недопустимый символ, следующие символы не принимаются: <> () \
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.