База знаний

Why Does My Dell Inspiron 8200 Not Power On in the Advanced Port Replicator? - KB Article - 123151

Redock the Computer

Redock the computer using the following procedure

  1. Make sure the computer is powered off.

  2. Check both docking connections for damage or loose debris.

  3. Close the LCD lid.

  4. Place one hand on the top of the computer and the back of the APR. Place the other hand on the front edge of the computer.

  5. Use the hand on the top of the computer as a guide while using the hand in the front to push the computer into the dock.

  6. Look for the battery charge light to blink.

  7. If the battery charge light begins to blink, power the computer on using the power button on the APR.
    If the battery light does not blink, redock the computer again while applying more pressure.

Inspiron 8200 Dock Additional Information

When both the Inspiron 8200 computer and the APR are new, the connection is extremely tight. The system may feel like it is completely docked when it is not. This connection will get easier in time after a docking and undocking the computer a few times.

Support Options

For more troubleshooting assistance, click one of the support options below.

Dell Community Forum - Inspiron - Port Replicators

Get answers from Dell customers helping each other.
E-mail Dell
Communicate by e-mail with a Dell Representative.

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN17748

Дата последнего изменения: 07/30/2010 12:00 AM

Оцените эту статью

Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Отзыв содержит недопустимый символ, следующие символы не принимаются: <> () &#92;
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Спасибо. Ваш отзыв отправлен.