База знаний

Poweredge C2100 foreign config found and volume/data inaccessible - Unconfigured foreign/Unconfigured bad



Article Summary: This article provides information on Poweredge C2100 foreign config found and volume/data inaccessible - Unconfigured foreign/Unconfigured bad.



Question

A PowerEdge™ C2100 may display a foreign configuration found and volume/data inaccessible - Unconfigured foreign/Unconfigured bad.

Occasionally a MegaRAID or SAS controller volume will list the drive members as 'Unconfigured foreign' or 'Unconfigured bad', and the volume will be inaccessible. It is possible to repair the Volume and keep the data intact using the MegaRAID or SAS controller WebBIOS.

LSI MegaRAID™ and LSI SAS™ controllers.


Answer

Steps to resolve.
  1. Reboot the system.
  2. Go into LSI WebBIOS by entering alt-h at boot time when prompted.
  3. Click on a 'Unconfigured bad' drive from front screen of WebBIOS.
  4. On the next screen, you will see an option to make 'Unconfigured good'. Select that option. Do not select any other option(s).
  5. Repeat for all drive(s) in the volume.
  6. Now you are back on the front page.
  7. Click Scan device-->It will ask you if you want to import the found foreign configuration. Preview, if looks right, then go ahead and import the configuration.
  8. Reboot and the volume and its data should be accessible.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN118625

Дата последнего изменения: 01/10/2014 12:00 AM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.