База знаний

Why is the fax quality low on the A960 All-In-One printer? - Product Support Quick Note (PSQN) - 177921




The default scan resolution for monochrome fax on the A960 printer offers the highest level of compatibility with receiving fax devices.

The default scan resolution on the A960 All-in-One printer for a monochrome fax is 100X100 pixels/inch. This setting offers the highest likelihood of compatibility with receiving devices, but at reduced quality.



Change the Fax Quality settings on the A960 All-In-One printer.

To change the fax quality settings on the A960 All-In-One printer, perform the following steps:

  1. On the printer, press the Fax button.

  2. Press the Quality button located near the lower left corner of the display, until the desired quality setting appears on the display.

  3. The available fax quality settings are:

    • Standard (100X100)

    • Default Fine (200X200)

    • Superfine (300X300)

    • Ultrafine (400X400)

  4. Press the Select button to save the desired fax quality setting.

  5. Press the Fax button.

  6. Press the Options button until Maintenance appears in the LCD display window.

  7. Press the Select button.

  8. Use the + or - button to scroll through the menu to locate Set Defaults.

  9. Press the Select button.

  10. Use the + or - button to scroll through the menu to locate Use Current.

  11. Press the Select button.



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN38420

Дата последнего изменения: 06/17/2009 12:00 AM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.