База знаний

How do I change the parallel port mode to ECP, EPP, or Bi-directional in the BIOS (System Setup) on a Dell Dimension 8100, 4100, XPS T, XPS L, XPS R, or XPS D series computer? - Technical Tip - 146192




Change the parallel port mode on a Dimension™ 4100, XPS T, XPS R, XPS D, and XPS L Series computer in the BIOS.

  1. Click the Start button, click Shut Down, click Restart, and then click OK.
  2. While the computer is restarting, enter the System Setup.

    NOTE:
    For more information regarding how to enter System Setup, please refer to the links in the Additional Items section below in this document.
    T
    he Dell Dimension Setup screen appears.
  3. Press the <Right Arrow> key.
    The Advanced screen appears.
  4. Press the <Down Arrow> key repeatedly to highlight Peripheral Configuration.
  5. Press the <Enter> key.
    The Peripheral Configuration screen appears.
  6. Press the <Down Arrow> key repeatedly to highlight Mode.
  7. Press the <Enter> key.
  8. Press the <Down Arrow> key to select the mode that you want.
  9. Once you have highlighted the parallel port mode that you want, press the <Enter> key.
  10. Press the <F10> key to save the configuration changes.
    You are prompted to save the changes that you have made.
  11. Press the <Enter> key to save the changes and restart the computer.



Change the parallel port mode on a Dimension™ 8100 computer in the BIOS.

  1. Click the Start button, click Shut Down, click Restart, and then click OK.
  2. While the computer is restarting, enter the System Setup.
    T
    he System Setup screen appears.
  3. Press the <Down Arrow> key repeatedly to highlight Integrated Devices.
  4. Press the <Enter> key.
  5. Press the <Down Arrow> key repeatedly to highlight Parallel Port.
  6. Press the <Enter> key.
  7. Press the <Right Arrow> key repeatedly to select the mode that you want.
  8. Press the <Esc> key 3 times to exit the System Setup.
    The message Save Changes and Exit appears.
  9. Press the <Enter> key to save the changes and restart the computer.



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN107233

Дата последнего изменения: 07/29/2010 12:00 AM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.