Kunskapsbank

E-Port II - Visual Guide to your Dock


Note: For a more detailed description about each location, please go to the system manuals at www.dell.com/Manuals

The following article is a visual guide to the external ports and features of the E-Port II Dock.


Table of Contents:

  1. Front View
  2. Rear View
  3. Left View
  4. Right View
  5. AC Adapter View
  6. Connecting a system to this Dock
  7. Disconnecting a system from this Dock

1. Front View

Front View

(Fig.1 Front View of Dock.)

1 Battery Bar Adjuster 2 Alignment Mark
3 Power Button 4 Docking LED
5 Eject Button 6 Docking Connector


Back to Top


2. Rear View

Rear View

(Fig.2 Rear View of Dock.)

1 Network Connector 2 Battery Bar Adjuster
3 E-Monitor Stand Connector 4 USB 2.0 or eSATA Connector
5 USB 3.0 Connector x2 6 VGA connector
7 DVI Connector 8 DisplayPort Connector
9 AC Adapter


Back to Top


3. Left View

Left View

(Fig.3 Left Hand Side View of Dock.)

1 USB 2.0 Connector x3 2 Headphone Connector
3 Microphone Connector


Back to Top


4. Right View

Right View

(Fig.4 Right Hand Side View of Dock.)

1 Eject Button 2 Security Cable Slot
3 Lock / Unlock Switch


Back to Top


5. AC Adapter View

130W Adapter

(Fig.5 130W AC Adapter.)

Type 130W Series Description
Input Voltage 100 VAC to 240 VAC
Output Power 130 W
Output Voltage 19.5 VDC

240W Adapter

(Fig.6 240W AC Adapter.)

Type 240W Series (seen as 210W on Dock) Description
Input Voltage 100 VAC to 240 VAC
Output Power 240 W
Output Voltage 19.5 VDC


Back to Top


6. Connecting a System to this Dock

Dock 1

(Fig.7 Docking Step 1.)

  1. This dock can work off of the Notebooks Battery or you can connect an AC adapter.

  2. Have the dock in a location with enough space to support the system once it's docked.

  3. If the system has a battery that extends behind the machine, then use the slide at the rear of the dock to adjust the sliding block flush with the battery.

Dock 2

(Fig.8 Docking Step 2.)

  1. Push the locking switch at the right hand side of the dock towards the rear of the dock to unlock it. DO NOT try and dock a system with this switch locked.

Dock 3

(Fig.9 Docking Step 3.)

  1. Line up the alignment marks on the dock and the system and push firmly down to seat the system on the docking connector. (You should hear a click as it seats in place.)

Dock 4

(Fig.10 Docking Step 4.)

  1. You can dock the system while it is turned on, however if you docked it whilst it was off - you can turn the system on by pressing the Power Button on either the system or the Dock.

  2. If it's doesn't boot correctly, undock the system and reseat it.


Back to Top


7. Disconnecting a System from this Dock

  1. Push the lock switch towards the rear of the dock to unlock it.

  2. Press the Eject button on the dock to undock it. Lift the system up and away from the dock.

Un-Dock

(Fig.11 Un-Docking.)


Back to Top





Artikel-ID: SLN285009

Senast ändrad: 01/27/2017 05:09 AM


Betygsätt den här artikeln

Korrekt
Användbart
Lätt att förstå
Var den här artikeln till nytta?
Ja Nej
Skicka dina synpunkter
Kommentarer får inte innehålla följande specialtecken: <>()\
Vårt feedbacksystem är tyvärr ut funktion just nu. Försök igen senare.

Tack för dina synpunkter.