Kunskapsbank

OptiPlex 9020 and XE2 Small Form Factor (SFF) Removal Guide for the Intrusion Switch and Feet


Table of Contents:

  1. Intrusion Switch Removal
  2. Rubber Feet Removal


This article provides information on removing components from an OptiPlex 9020 and XE2 Small Form Factor chassis.


1. Intrusion Switch Removal

1. Pre-Removal Instructions Before removing the Intrusion Switch:

  • During installation or removal of any hardware always ensure all data is backed up properly
  • Disconnect any telephone, network, or USB cables from the computer
  • Disconnect the computer and all attached devices from their electrical outlets
  • Please remove the System Cover

2. Establishing image.



3. Disconnect the intrusion cable from the Motherboard.



4. Slide the intrusion switch inward and remove it from the chassis.



5. Complete.



Back to Top


2. Rubber Feet Removal

1. Pre-Removal Instructions Before removing the Rubber Feet:

  • During installation or removal of any hardware always ensure all data is backed up properly
  • Disconnect any telephone, network, or USB cables from the computer
  • Disconnect the computer and all attached devices from their electrical outlets

2. Establishing image.



3. Pry the rubber foot off.



4. Peel the rubber foot off the chassis.


Note: Repeat steps 3 and 4 to remove the remaining feet.

5. Complete.




Return to the 9020 OptiPlex Teardown/Removal Guide


Back to Top


If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Artikel-ID: SLN289121

Senast ändrad: 09/09/2014 08:59 AM


Betygsätt den här artikeln

Korrekt
Användbart
Lätt att förstå
Var den här artikeln till nytta?
Ja Nej
Skicka dina synpunkter
Kommentarer får inte innehålla följande specialtecken: <>()\
Vårt feedbacksystem är tyvärr ut funktion just nu. Försök igen senare.

Tack för dina synpunkter.