Kunskapsbank

OptiPlex 9010 Removal Guide Index for Customer Replaceable Parts (CRU)



This article provides information on how to safely remove the customer replaceable units (CRUs) in the various Dell Optiplex 9010


Table of Contents:

  1. Removal Guide Contents
  2. The Mini Tower (MT) Chassis
  3. The Desktop (DT) Chassis
  4. The Small Form Factor (SFF) Chassis
  5. The Ultra Small Form Factor (USFF) Chassis

1. Removal Guide Contents

These guides will take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of the Various Dell Optiplex 9010 systems. (CRUs are the parts of the system that shouldn't need an engineer to remove or replace).

The guides will also include pictures to reference what's involved.

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.


Back to Top


2. The Mini Tower (MT) Chassis

Back to Top


3. The Desktop (DT) Chassis

Back to Top


3. The Small Form Factor (SFF) Chassis



Back to Top

4. The Ultra Small Form Factor (SFF) Chassis



Back to Top

If you require further assistance, please contact Technical Support




Artikel-ID: SLN298119

Senast ändrad: 08/10/2017 10:22 AM


Betygsätt den här artikeln

Korrekt
Användbart
Lätt att förstå
Var den här artikeln till nytta?
Ja Nej
Skicka dina synpunkter
Kommentarer får inte innehålla följande specialtecken: <>()\
Vårt feedbacksystem är tyvärr ut funktion just nu. Försök igen senare.

Tack för dina synpunkter.