Kunskapsbank

Dell PowerEdge Server with Nehalem Processorss May Experience CPU IERR Error Using ESXi 4.0.0



Article Summary: This article provides information on a Dell PowerEdge Server with Nehalem Processors May Experience CPU IERR Error Using ESXi 4.0.0


Issue:

A Dell PowerEdge™ server with Intel Nehalem™ processors may experience CPU IER errors using ESXi 4.0.0.

Solution:

Update to the latest iDRAC firmware.

Additional Information:

Systems with Nehalem CPUs have been reported to log CPU IERR alerts in vCenter 4.0 console. The alerts indicate that a problem has been encountered with the CPU. The message will ether display a "CPUierr" or "Processor State Alert". This problem has only been seen with Hosts that have ESXi 4.0 installed. An additional message gets logged in the System log, "BMC incorrect response". This can be viewed from the the HOST .

Neither the iDRAC or CMC log these messages and are considered false messages.

No not send any hardware, this is a false alert message that has no functional effect on the operating system. This message can cause an alert to be generated if traps are configured for CPU events.

To obtain the latest iDRAC firmware, see the Dell Remote Access Controller - DRAC / iDRAC Systems Management WIKI




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Artikel-ID: SLN283173

Senast ändrad: 08/11/2015 10:29 AM


Betygsätt den här artikeln

Korrekt
Användbart
Lätt att förstå
Var den här artikeln till nytta?
Ja Nej
Skicka dina synpunkter
Kommentarer får inte innehålla följande specialtecken: <>()\
Vårt feedbacksystem är tyvärr ut funktion just nu. Försök igen senare.

Tack för dina synpunkter.