Databáza poznatkov

How to Install or Re-install a Printer on Windows 7 Using a Wired or Wireless Network Connection


Table of Contents:

  1. How to Install or Re-install a Printer on Windows 7 Using a Wired or Wireless Network Connection

This article provides information on "How to Install or Re-install a Printer on Windows 7 Using a Wired or Wireless Network Connection"


1. How to Install or Re-install a Printer on Windows 7 Using a Wired or Wireless Network Connection

If the printer has previously been installed on the system, fully uninstall the driver and other software before re-installing.

Note: Exact instructions for your model of printer can be found in the User Guide.

  • On the top menu bar, click Add a Printer.

  • Select Add a local printer.

  • Select Create a new port, from the drop down list select Standard TCP/IP Port. Click Next.

  • In the field labeled Hostname or IP address enter the IP address of the printer. The Port Name field is automatically populated. Uncheck the option for Query the printer and automatically select the driver to use then click Next.

  • If prompted for Additional Port Information, under Device Type, select Standard and Generic Network Card then click Next.

  • Click the Have Disk button.

  • Click Browse

  • Navigate to the extracted files and click Open.

  • Often the driver will be a few directories deep. In this case we select the Printer folder first.

    Note: The instructions in this step are a general guide using one driver package as an illustration. Different driver packages will have slightly different folder structures.

  • We are then presented with a choice between PCL (Printer Command Language) and PS (PostScript) drivers. In this example we are choosing PostScript.

  • Language options are often present, in our example we select English.

  • Operating system folders are also common, for our example we select WINXP_VISTA_64 meaning 64-bit drivers for Windows 2000, XP and Vista. If, as in this case, your version of Windows is newer than those listed, use the latest OS version with the correct architecture.

  • Select the driver (*.inf) file, in this case dp5330.inf, and click open.

  • In the Install from Disk dialogue click OK.

  • Some driver packages may include drivers for more than one model or variant. Select the correct model from the list if applicable, then click Next.

  • Printer name may be changed if desired, or leave as default and click Next.

  • Choose if the printer should be shared, with this PC acting as a print server, then click Next. If you are unsure select Do not share this printer.

  • Check the box next to Set as the default printer if desired. Click the Print a test page button then click Finish to exit the Wizard.

    If these steps do not correct the problem, please contact Dell Technical Support.

    Back to Top



  • Identifikátor článku: SLN284831

    Dátum poslednej zmeny: 12/16/2015 09:31 AM


    Ohodnotiť tento článok

    Presné
    Užitočné
    Jednoducho pochopiteľné
    Bol pre vás tento článok užitočný?
    Áno Nie
    Pošlite nám pripomienky.
    Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
    Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

    Ďakujeme vám za pripomienky.