Databáza poznatkov

CMC Web Interface BIOS Profile Page May Not List BIOS Profile Settings When Querying Blade Server


Article Summary: This article provides information on CMC web interface BIOS profile page may not list BIOS profile settings when querying Blade Server.




Question

When attempting to view the BIOS profile from the PowerEdge M1000e Chassis Management Controller (CMC) web interface, the following error may be seen from the following page:

Server Overview > Setup > Profiles > View

Clicking on "View" for a PowerEdge Blade server that has Lifecycle Controller firmware version 1.5.5.27, may return an error:

"Error accessing the server"


The error will only be seen with Lifecycle Controller v1.5.5.27 and CMC firmware v4.20






Answer

A fix is currently available in CMC v4.30 and greater available at CMC for M1000e SYSTEMS MANAGEMENT - WIKI.


 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identifikátor článku: SLN285562

Dátum poslednej zmeny: 11/04/2013 12:00 AM


Ohodnotiť tento článok

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Poznámky nemôžu obsahovať nasledujúce špeciálne znaky: <>()\
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme vám za pripomienky.