Databáza poznatkov

Latitude E5250/E5450/E5550/E7250/E7450 with Blanking, Flickering or Blinking Video on External Monitors when Connected to Docking Stations


This article provides information on issues regarding flickering video along with troubleshooting steps and driver links to resolve the issue.


Flickering/Blinking video on external monitors

Dell Latitude E5250 / E5450 / E5550 / E7250 / E7450 may encouter video flickering / blinking when connecting to a docking station attached to dual external monitors. The video will blink intermittently for about 2-3 seconds at a time throughout the day when connected to the DisplayPort (DP), Digital Video Interface (DVI), or Video Graphics Array (VGA) cable connections.

Docking station part numbers reported with the issue.

  • CPGHK - E-Port Docking Station
  • 8RNJ7 - Older E-Port Docking Station
  • 35RXK - E-Port Plus
  • JKJ9X - E-Port Plus II



Recommended troubleshooting steps

  1. Reseat video cables to docking station.
  2. Check refresh rate and resolution of monitors - for instruction please view our article Adjust the Screen Resolution, Color Depth, Refresh Rate and Size of Fonts and Icons
  3. Ensure the BIOS revision is up to date by visiting the Dell Drivers & Downloads page, updating to the latest version available.
  4. Also, update to the latest Video Driver by visiting the Dell Drivers & Downloads page, updating to the latest version available.
  5. Update to the latest MST HUB Firmware by visiting the Dell Drivers & Downloads page, updating to the latest version available.
    Note: In order to flash the MST HUB, the latest video driver needs to be installed and the system must be docked with an active external monitor connected.

Should these steps not fully resolve the issue, please contact Dell Technical Support.



Identifikátor článku: SLN298095

Dátum poslednej zmeny: 04/20/2017 03:26 AM


Související články

Ohodnotiť tento článok

Presné
Užitočné
Jednoducho pochopiteľné
Bol pre vás tento článok užitočný?
Áno Nie
Pošlite nám pripomienky.
Pripomienky obsahujú neplatný znak. Nie je možné používať špeciálne znaky <> () &#92;.
Ľutujeme, náš systém odosielania pripomienok je momentálne nefunkčný. Skúste znova neskôr.

Ďakujeme. Vaše pripomienky boli odoslané.