Base de connaissances

How to Manually Configure a Permanently Blacklisted MAC Address on Dell PowerConnect Wireless Switch Controller




This article explains how to manually configure a permanently blacklisted MAC address on Dell PowerConnect Wireless Switch Controller.



Objectives
  1. Overview
  2. Configuration Example
  3. Verification with Show Commands


Overview


A customer called in and explained that he needs to permanently blacklist a MAC address. He has followed the 6.4.x User Guide, and set the blacklist-time to "0" (indefinite), but the GUI and the CLI still show the blackout timer is counting down from 3600 seconds (default) for that MAC address.

From the 6.4.x User Guide, page 558 (Blacklisting Manually)

stm add-blacklist-client <macaddr>

From the 6.4.x User Guide, page 560 (Setting Blacklist Duration)

For clients that are blacklisted due to other reasons, including manual blacklisting. By default, this is set to
3600 seconds (one hour). You can set this to 0 to blacklist clients indefinitely.

wlan virtual-ap <profile>
blacklist-time <seconds>

Here is the link that provides the solution. http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/Permanent-Blacklist-no-longer-working/td-p/132835


Configuration Example.


(Dell-Wireless) #show ap blacklist-clients

Blacklisted Clients
-------------------
STA reason block-time(sec) remaining time(sec)
--- ------ --------------- -------------------
a4:5e:60:d7:19:65 user-defined 2950 650

NOTE: The time remaining on the user defined black listed client.

(Dell-Wireless) #stm remove-blacklist-client a4:5e:60:d7:19:65

NOTE: Removes a blacklisted MAC address


(Dell-Wireless) #show ap blacklist-clients

Blacklisted Clients
-------------------
STA reason block-time(sec) remaining time(sec)
--- ------ --------------- -------------------

NOTE: Verifies the MAC address has been removed from the blacklist

(Dell-Wireless) # configure t
Enter Configuration commands, one per line. End with CNTL/Z

(Dell-Wireless) (config) #ap ap-blacklist-time 0
(Dell-Wireless) (config) #exit

NOTE: The command that is missing from the User's Guide, but explained in the link above


(Dell-Wireless) #stm add-blacklist-client a4:5e:60:d7:19:65

NOTE: Adds the blacklisted MAC address.



Verification with Show Command

(Dell-Wireless) #show ap blacklist-clients

Blacklisted Clients
-------------------
STA reason block-time(sec) remaining time(sec)
--- ------ --------------- -------------------
a4:5e:60:d7:19:65 user-defined 0 Permanent








ID de l'article : HOW11120

Date de la dernière modification : 06/09/2016 07:11 AM


Noter cet article

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
Oui Non
Envoyez-nous vos commentaires
Vos commentaires comportent un caractère non valide. Les caractères spéciaux refusés sont <> () &#92;
Désolé, notre système de collecte des commentaires est actuellement indisponible. Veuillez réessayer ultérieurement.

Merci. Vos commentaires ont été envoyés.