Base de connaissances

How to properly disable Internet Protocol Version 6 (IPV6) on a Windows system



Article Summary: This article provides information about disabling IPV6 on a Windows computer


Issue:

Partial / improper disabling of IPV6 on a Windows Server System (e.g., unchecking the
IPV6 protocol from the NIC properties box) can lead to unstable and unpredictable
system behavior.

Solution:

Disable IPV6 system settings by editing the system registry.

Steps:

1.
Open Registry with "Regedit"

i. Windows Server 2008 R2 and earlier- At the desktop Start menu, select Run,
and type 'regedit.exe'.

ii. Windows Server 2012 and later- Press the Windows key + Q, and type 'regedit'
in the 'search' box. Click on the registry editor (regedit) icon when displayed.

2. Navigate to the following registry hive:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters

3. Create a DWORD (32-bit) value and name it as "Disabled Components" and then
click OK.

4. Double click "Disabled Components" and type 0xffffffff (hexadecimal value) or
4294967295 (Decimal value).

Note: The above value 0xffffffff (hexadecimal value) or 4294967295 (Decimal value) will disable all IPv6 components, except the IPv6 loopback interface.

Additional Information:

Should I Disable IPv6?




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

ID de l'article : SLN290328

Date de la dernière modification : 10/20/2014 11:58 AM


Noter cet article

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
Oui Non
Envoyez-nous vos commentaires
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\
Désolé, notre système de collecte des commentaires est actuellement indisponible. Veuillez réessayer ultérieurement.

Merci pour vos commentaires.