Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Article Number: 000138584


How to assign services to a New Exchange Certificate in Exchange 2010 through Exchange Management Console

Article Content


Symptoms


Article Summary: This article provides information about How to assigning services to a New Exchange Certificate in Exchange 2010 through Exchange Management Console


 

In the console tree, select Server Configuration.

In the action pane, click Assign Services to Certificate to open the Assign Services to Certificate wizard.

This wizard helps you assign the appropriate services to your certificate for your Exchange organization.

On the Assign Services page, use the check boxes in the Assign Services section to choose the services you want to assign to your certificate. If you chose services during certificate creation, these services will already be checked. Click Assign.

On the Completion page, verify that all of the services were assigned properly.

If you attempt to assign the Unified Messaging service to the certificate and the certificate is running in TCP mode only, assignment will fail. In order to use a certificate for Unified Messaging, it must be set to run in TLS mode or Dual mode.
 

Article Properties


Affected Product

Servers, PowerEdge, Microsoft Windows 2008 Server R2, Microsoft Windows 2008 Server Service Pack 2, Microsoft Windows 2012 Server, Microsoft Windows 2012 Server R2

Last Published Date

21 Feb 2021

Version

3

Article Type

Solution