Consulta de temas

M1000e Power Consumption Number Does Not Scale with Efficiency


Article Summary: This article provides information on M1000e power consumption number does not scale with efficiency.



Question

Problem: On a PowerEdge M1000e™ the AC blade consumption displayed on the GUI doesn’t take into account more efficient PSU modes afforded by the Dynamic Power Supply Engagement (DPSE) power optimization function.

Discussion: Chassis Management Controller (CMC) GUI power readings use fixed conversion efficiency, 85.3%, while a dynamic efficiency is calculated and delivered to iDRAC for power plotting that varies between 73.2% and 91.2%. The GUI readings don’t take DPSE efficiencies into account.


Answer

Do not replace hardware. The value of GUI scaling is modest for the user.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identificación del artículo: SLN285553

Última fecha de modificación: 11/06/2013 12:00 AM


Califique este artículo

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
No
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Muchas gracias por sus comentarios.