Consulta de temas

Precision Workstation M4600 RAID Configuration


Article Summary: This article contains information regarding configuration of RAID on the Precision Workstation M4600.


Table of Contents:
  1. Requirements
  2. Configuring


1.

Requirements


Raid 0 and 1 is supported through the addition of a 2nd storage hard drive via a Solid State Drive Mini Card (SSD MC). Alternatively, Users can choose to use the 128GB SSD MC as a single solid state storage as a stand-alone drive in addition to, or in replacement of the 2.5in drive without RAID. RAID requires two hard drive storage devices.
Note:
The SSD MC utilizes the same slot as a WWAN (Broadband) card, which means if you have a SSD mini card, you cannot have a WWAN card and vice versa.
The image below is a typical SSD Mini Card:




Back to Top


2.

Configuring


Raid 0 or Raid 1 can be configured (with two drives present) in the Dell Precision M4600 by following these steps:
Note:
By default, Raid On is set to Enabled in the BIOS. If Raid On is disabled in the BIOS, Users will not be able to configure RAID.

To enable RAID in the BIOS:
  1. Enter System Setup
  2. Press the up- and down-arrow keys to highlight System Configuration. Press Enter
  3. Press the up- and down-arrow keys to highlight SATA Operation. Press Enter
  4. Press the left- and right-arrow keys to highlight RAID On. Press Enter
  5. Press the left- and right-arrow keys to highlight Save/Exit. Press Enter to exit System Setup and resume the boot process


To enter the RAID configuration utility:

When prompted during system startup, press Ctrl and i <Cntrl i> at the same time to enter the configuration utility to create / manage Raid volume.

    Back to Top

    Click the button below to Tweet feedback or request assistance on anything in the above article.

     


    Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

    Identificación del artículo: SLN288805

    Última fecha de modificación: 01/22/2014 12:00 AM


    Califique este artículo

    Preciso
    Útil
    Fácil de comprender
    ¿Este artículo fue útil?
    No
    Envíenos sus comentarios
    Los comentarios muestran caracteres no válidos, los caracteres especiales que no se aceptan son <> () &#92;
    Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

    Gracias. Sus comentarios se han enviado.