知識庫

How to Manually Configure a Permanently Blacklisted MAC Address on Dell PowerConnect Wireless Switch Controller




This article explains how to manually configure a permanently blacklisted MAC address on Dell PowerConnect Wireless Switch Controller.



Objectives
  1. Overview
  2. Configuration Example
  3. Verification with Show Commands


Overview


A customer called in and explained that he needs to permanently blacklist a MAC address. He has followed the 6.4.x User Guide, and set the blacklist-time to "0" (indefinite), but the GUI and the CLI still show the blackout timer is counting down from 3600 seconds (default) for that MAC address.

From the 6.4.x User Guide, page 558 (Blacklisting Manually)

stm add-blacklist-client <macaddr>

From the 6.4.x User Guide, page 560 (Setting Blacklist Duration)

For clients that are blacklisted due to other reasons, including manual blacklisting. By default, this is set to
3600 seconds (one hour). You can set this to 0 to blacklist clients indefinitely.

wlan virtual-ap <profile>
blacklist-time <seconds>

Here is the link that provides the solution. http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/Permanent-Blacklist-no-longer-working/td-p/132835


Configuration Example.


(Dell-Wireless) #show ap blacklist-clients

Blacklisted Clients
-------------------
STA reason block-time(sec) remaining time(sec)
--- ------ --------------- -------------------
a4:5e:60:d7:19:65 user-defined 2950 650

NOTE: The time remaining on the user defined black listed client.

(Dell-Wireless) #stm remove-blacklist-client a4:5e:60:d7:19:65

NOTE: Removes a blacklisted MAC address


(Dell-Wireless) #show ap blacklist-clients

Blacklisted Clients
-------------------
STA reason block-time(sec) remaining time(sec)
--- ------ --------------- -------------------

NOTE: Verifies the MAC address has been removed from the blacklist

(Dell-Wireless) # configure t
Enter Configuration commands, one per line. End with CNTL/Z

(Dell-Wireless) (config) #ap ap-blacklist-time 0
(Dell-Wireless) (config) #exit

NOTE: The command that is missing from the User's Guide, but explained in the link above


(Dell-Wireless) #stm add-blacklist-client a4:5e:60:d7:19:65

NOTE: Adds the blacklisted MAC address.



Verification with Show Command

(Dell-Wireless) #show ap blacklist-clients

Blacklisted Clients
-------------------
STA reason block-time(sec) remaining time(sec)
--- ------ --------------- -------------------
a4:5e:60:d7:19:65 user-defined 0 Permanent








文章 ID: HOW11120

上次修改日期: 06/09/2016 07:11 AM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
意見反應中有無效的字元,不接受的特殊字元如下 <> () &#92;
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您。您的意見已送出。