知識庫

How do I determine a failed DIMM/SIMM slot by hex address? - KB Article - 148442




Determine the memory failure by HEX address.

If your system crashes, either the BIOS reports an error or the manufacturers hardware diagnosis will point to a specific HEX address. This HEX address can be used to determine which DIMM/SIMM slot is at fault.

To determine the memory failure by HEX address, perform the following steps:

  1. Click Start, point to Programs, point to Accessories and click Calculator.
  2. Change the View to Scientific View and select the HEX radio button.
  3. Type the hex address into the calculator.
  4. Click the DEC radio button to convert to decimal format.
  5. Divide by 1024 to return the memory in kilobytes.
  6. Divide again by 1024 to return the value in megabytes .

In the example illustrated in Figure 1, the fault appears at 1824MB. If your memory configuration is 256Mb x 8 DIMMs, a total of 2048Mbs. Divide 1824 by 256 which returns 7.125 therefore the 7th DIMM is at fault.


Figure 1 - Calculator



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

文章 ID: SLN107236

上次修改日期: 07/29/2010 12:00 AM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
評語中不得包含下列特殊字元:<>()\
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您的寶貴意見。