知識庫

How do I flash (recover) the BIOS on the Dell™ PowerEdge™ 8450? - Technical Tip - 131672


Flash (recover) the BIOS on the 8450

To flash (recover) the BIOS on the PowerEdge 8450, perform the following steps:

  1. Power the system down.
  2. Remove the system cover so you can see the PCI slots and the 8-position dipswitch (SW4G1) (See Figure 1.)

    NOTE: For more information on removing and replacing the computer cover, refer to the appropriate User's Guide.


    Figure 1 - 8-position dipswitch

  3. Move the BIOS recovery switch #2 to the On or Closed position (Figure 2).


    Figure 2 - Recovery switch in the "On" or "Closed" position

  4. Download the latest FlashBIOS Update file from the Dell Support site, and follow the onscreen instructions to create the BIOS recovery diskette.

    NOTE: For more information on searching and downloading drivers, refer to Dell Knowledge Base Article "How to Obtain Downloadable Drivers, Files, and Utilities for a Dell™ Computer" Article ID: 167409.

  5. Insert the diskette into the system.
  6. Power the system on.

    NOTE: The recovery BIOS will boot the system from the diskette and re-flash the system BIOS without LCD or video display. This procedure begins with a single beep. When the recovery of the system BIOS completes, two beeps sound. Next, the procedure recovers user binary code, concluding with two more beeps if the recovery is successful. If the recovery procedure fails, a continuous series of beeps is emitted. The entire process can take up to five minutes.

CAUTION

CAUTION: Do not interrupt the recovery; doing so could cause damage to the profusion chip set and SCSI backplane.

  1. After the flash/recovery is complete, power the system off.
  2. Remove the flash diskette.
  3. Restore the #2 dipswitch to the original position.
  4. Put the computer cover back on.
  5. Turn the system power on for normal operation.
  6. Flash the latest version of firmware, if necessary.

NOTE: For more information on flashing the BIOS on the PowerEdge 8450, refer to the User's Guide.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

文章 ID: SLN130546

上次修改日期: 10/25/2012 12:00 AM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
意見反應中有無效的字元,不接受的特殊字元如下 <> () &#92;
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您。您的意見已送出。