知識庫

042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


Article Summary: This article provides Information on 042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


Table of Contents:
  1. 042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


1.

042-700: IOT Over Heat Stop Error on the Dell 2155cn/cdn Laser Printer


This error may occur if the Printer is overheating.

In order to attempt to resolve this issue, please follow the steps below:
  1. Ensure that the Printer is not being used in an unsuitable environment:
    • Operation Temperature Range: 10°C - 32°C

    • Print Quality Guarantee Temperature Range: 15 °C - 28 °C

  2. If the Printer is within this environmental range, turn off the power on the Printer

  3. Remove the PHD Unit and ensure that all packaging has been removed

  4. Leave the PHD Unit out of the Printer for an extended period to ensure that it has cooled down

  5. Re-insert the PHD Unit and Power the Printer on

  6. If the error recurs after extended use, please try another PDH Unit (if available)

  7. If the error recurs with a working PHD Unit (or none is available), please contact Dell via Twitter to raise a Technical Support issue


Back to Top




文章 ID: SLN286274

上次修改日期: 09/28/2016 09:15 AM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
意見反應中有無效的字元,不接受的特殊字元如下 <> () &#92;
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您。您的意見已送出。