知識庫

Unknown Devices Appearing in PCI Passthrough Configuration in ESXi 5.1 on a Blade in a PowerEdge VRTX Chassis



Article Summary: This article provides information on issues with unknown devices appearing in PCI passthrough configuration in ESXi 5.1 on a blade in a PowerEdge VRTX chassis.


Issue :
The bridges are displayed as unknown devices in PCI passthrough configuration page in VMware ESXi 5.1.



Discussion :
This is a cosmetic issue with the PCI passthrough. Functionally, it works fine for the supported devices. The reason is pci.ids available in PCI source forge site was not carrying Next IO and PLX Bridge's device IDs. Though the source forge is updated with the IDs now, ESXi 5.1 does not carry these hence the devices are marked as unknown.

Resolution :
VMware is aware of the issue and the updated pci.ids is going to be part of the ESXi 5.1 update 2 release.





Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

文章 ID: SLN283526

上次修改日期: 10/06/2014 12:52 PM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
評語中不得包含下列特殊字元:<>()\
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您的寶貴意見。