知識庫

Dell 2408WFP May Have No Video Due to Incorrect Video Input Selected - KB Article - 357065




Dell 2408WFP May Have No Video Due to Incorrect Video Input Selected

Problem:
Dell 2408WFP may have no video with only a power light on and may be showing only an On Screen Display (OSD) that says "No Display Port Cable." Pressing the monitor's main OSD menu button, the Picture-in-Picture button, and the + or - buttons will have no effect. The buttons having no effect when in this state is working as desinged.

Solution:
Ensure the video cable is securely connected to both the monitor and computer and determine what kind of input cable is being used (i.e. VGA, DVI, HDMI, ect.) Press the Input Select button until the appropriate connection type is selected. For more information regarding the monitor operation and connection being used, see the monitor's User's Guide section labled: Operating the Monitor

Note:
If the above instructions do not correct the issue, continue to trouble-shoot issue.



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

文章 ID: SLN106871

上次修改日期: 07/25/2010 12:00 AM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
評語中不得包含下列特殊字元:<>()\
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您的寶貴意見。