知識庫

Why is Primary Hard Disk Drive Controller (Dual FIFO) displayed under Problem Devices in System Information when I have a Promise ATA-66 Controller Card installed in my system? - Technical Tip - 164229




Hardware is Functioning Properly.

To confirm that the primary hard disk drive controller is listed under Problem Devices, perform the following steps:

  1. Click the Start button, point to Programs, point to Accessories, point to System Tools, and click System Information.
  2. Click the plus (+) sign next to Components to expand the subcategories.
  3. Click Problem Devices.
    The primary hard disk drive controller (dual FIFO) should appear with the message there is a problem with the device- it is disabled in the current hardware profile.

The Promise ATA-66 Controller Cards are designed so that the hard drive will completely bypass the motherboard, and is accessed with the controller card instead. Since the primary IDE controller on the motherboard is not in use, Windows reports that the controller has been disabled.

The hardware is functioning properly. This error message is displayed because the primary hard disk drive is connected to the Promise ATA-66 Controller Card instead of the motherboard.



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

文章 ID: SLN107021

上次修改日期: 08/01/2010 12:00 AM


為本文評分

準確
實用
易懂
這篇文章對您有用嗎?
傳送意見反應
評語中不得包含下列特殊字元:<>()\
很抱歉,我們的意見回饋系統目前關閉中。請稍後再試。

感謝您的寶貴意見。