База знаний

Troubleshoot repeating defects by measuring the interval on the Dell 3130cn or 3130cdn laser printer

Article Summary: How to troubleshoot repeating defects by measuring the interval on the Dell 3130cn or 3130cdn laser printer

Print quality issues that repeat at set intervals on the page are often caused by a damaged or contaminated roller in the printer. Measuring the interval the defects occur at can identify the faulty component.
  1. Print the contamination check test page.
  2. Measure, in millimetres, the distance from the top of one defect to the top of the next

  3. Check the table below, replace the part indicated if possible

Component Interval (mm) Replaceable Part
Drum 75.4 Toner Cartridge
BCR 28.3 Toner Cartridge
BCR Cleaner Roll 25.1 Toner Cartridge
Sleeve (K) 27.9 Toner Cartridge
Sleeve (Y,M,C) 27.9 Toner Cartridge
1stBTR 31.4 Transfer Belt
Drive Roll 56.9 Transfer Belt
Fuser Roll 82.7 Fuser
Fuser Belt 94.2 Fuser
Pinch Roll 18.8 Fuser
Exit Roll 43.1 Fuser
Exit Pinch Roll 31.4 Fuser

If you require further assistance or wish to give us feedback, please engage our technical team on Twitter.

Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN286139

Дата последнего изменения: 11/25/2013 12:00 AM

Оцените эту статью

Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.