База знаний

Windows Stop Error 0x0000009e Netft.sys in Windows Server 2008 R2



Article Summary: This article provides information on a Windows stop error 0x0000009e caused by Netft.sys


Issue:

A Windows stop error Windows Stop Error 0x0000009e ( parameter1 , parameter2 , parameter3 , parameter4 ) USER_MODE_HEALTH_MONITOR Netft.sys may occur on Windows Server 2008 R2 servers that have the Failover Clustering feature installed.

Solution:

There are two Microsoft Windows Server 2008 R2 hotfixes available to resolve this issue. Apply one or both of the hotfixes.

Information and downloads for hotfix 2135160 can be found here.

Information and downloads for hotfix 2520235 can be found here.

Additional Information:

Review of the memory dump file using Debugging Tools for Windows will result in output similar to the following.

BugCheck 9e (0xfffffa814ab789e0, 0x000000000000003c, 0x0000000000000000, 0x0000000000000000).

Probably caused by : netft.sys ( netft ! NetftWatchdogTimerDpc+b9 )

USER_MODE_HEALTH_MONITORING




Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN289416

Дата последнего изменения: 08/27/2014 10:16 AM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.