Whether you want to modify the original configuration or create a new configuration, the steps below will provide you with information on how to install and configure Hard drives and RAID controllers in your server.
At time of system purchase, most Dell systems come pre-configured with the RAID type you selected and are functional out of box. Typically, in this situation, no customer action is required since it is configured and working.
If, after receiving the unit, you want to perform a change :
If, after receiving the unit, you want to create a new configuration:
The RAID level may be changed through the software or controller interface without data loss depending on : the controller itself, the original RAID type, the type you are looking to go to. Not all migrations are supported. If the migration is not possible, it will require a complete wipe of the hard drives and re-creation from scratch.
For more information on RAID Migrations and expansions, please refer to the Dell PowerEdge RAID controller user manual or the following articles:
The RAID configurations available in your server depend on the specifications of the PowerEdge RAID (PERC) controller installed.
For more information on your PERC's features, you can review the controller's user guide or some of the other articles available :
- Article on Dell PowerEdge RAID Controllers
- User Guides : www.dell.com/support and enter your system's service tag to access the documentation.
The following article details the steps to create, initialize and manage virtual disks using your PowerEdge RAID controller:
You will find below several articles on how to first setup your Dell PowerEdge Server:
- Out of The Box Setup Information for Dell PowerEdge 12G and 13G Servers
- Out of the Box Setup Information for Dell PowerEdge 11G Servers
- Out of The Box Setup information for Dell PowerEdge 10G Servers
For more information, always refer to the user manual available on www.dell.com/support.
Several articles exist to cover the different maintenance options available on your Dell PowerEdge server to ensure it has an optimal performance.
The articles are gathered on this ressource library : Maintenance/Monitoring : automated and manual operations
|Need more help?|
|Find additional PowerEdge and PowerVault articles|
Visit and ask for support in our Communities
Create an online support Request
Код статьи: SLN292296
Дата последнего изменения: 08/24/2017 05:36 AM