База знаний

What are the differences between Adaptive Load Balancing, Fast EtherChannel, and Adapter Fault Tolerance? - KB Article - 162747




Definitions of Teaming Methods

Adaptive Load Balancing, Fast EtherChannel, and Adapter Fault Tolerance are network adapter teaming methods, which involves the use of multiple network adapters.

Adaptive Load Balancing

Adaptive Load Balancing (ALB) developed by Intel, balances outgoing server traffic among as many as four network adapters. This enables server bandwidth to be increased in 100Mbps increments, up to 400Mbps. Of course, multiple adapters can be used in a server even if they don''t support ALB, but the load must then be distributed between them by segmenting the network - a costly and time-consuming task. ALB provides a much simpler and more efficient solution.

Adapter Fault Tolerance

Adapter Fault Tolerance (AFT) works in conjunction with Adaptive Load Balancing and Fast EtherChannel to safeguard the vital network link to the server. If one or more links fail, for whatever reason, all server traffic is automatically transferred to the remaining network adapters. The shift is transparent to applications and users. So even in the event of a broken or loose cable, a hub or switch port failure, or adapter hardware breakdown, the server stays up and running.

Fast EtherChannel

Fast EtherChannel (FEC), developed by Cisco, is similar to Adaptive Load Balancing, but must be supported in the switch as well as in the adapters. FEC balances the traffic load in both directions, boosting throughput for data received by the server as well as data transmitted from the server. It therefore delivers scalable bandwidth in 200Mbps increments, up to 800Mbps at full duplex.



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN32166

Дата последнего изменения: 08/02/2010 12:00 AM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.