База знаний

Why are USB 2.0 devices connected to a USB 2.0 hub not immediately recognized by Red Hat Enterprise Linux (RHEL) 3? - KB Article - 173811


Red Hat Enterprise Linux 3 does not immediately recognize USB devices connected through a USB 2.0 hub.

When you plug a USB 2.0 device into a USB hub attached to a system, the kernel may not recognize the new device immediately.



Run kudzu to detect the newly attached USB device.

If this occurs, run kudzu to detect the new device.

To run kudzu, perform the following steps:

  1. If you are not at a command prompt, press <Ctrl>+<Alt>+<F1> to open tty1.
    Tty1 opens and displays a login prompt.
  2. Log in as root.
    The command prompt appears.
  3. At the command prompt, type kudzu and press the <Enter> key.
    The system scans for new devices and configures the newly attached USB device.
  4. Type exit and press the <Enter> key to log out of tty1, then press the <Alt> and <F7> keys together to return to X Windows.



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN48994

Дата последнего изменения: 11/14/2010 12:00 AM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.