База знаний

How do I set the processor speed on my Dell Dimension XPS R, XPS D, or XPS V series computer? - Technical Tip - 155738




Put the system into maintenance/configuration mode and adjust processor speed

To put the computer into maintenance/configuration mode and adjust the processor speed, perform the following steps:

  1. Turn off the computer and then unplug the power cord from the back of the power supply.
  2. Remove the cover.
  3. On the motherboard, configure the maintenance mode jumper to cover the second (2nd) and third (3rd) pins.
  4. Reconnect the power cord and then turn the system on.
    The maintenance screen appears with two options: clearing bios passwords and setting processor speed.
  5. Press the < Down Arrow > key to highlight setting processor speed and then press the < Enter > key.
  6. Set the processor speed in the System Setup (BIOS) to match the speed of the processor that was sent with your computer.

    CAUTION: Over-clocking the system, by setting the speed to a value higher than your actual rated processor speed, may damage the system and void your warranty.



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Код статьи: SLN107030

Дата последнего изменения: 08/01/2010 12:00 AM


Оцените эту статью

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
Да Нет
Отправьте нам свое мнение
Комментарии не должны содержать следующие специальные символы: <>()\
К сожалению, наша система обратной связи в настоящее время не работает. Повторите попытку позже.

Благодарим вас за отзыв.