Knowledge Base

How to Install the Thermo Fan Monitoring Application on the Area-51 m15x Mobile System?


Article Summary: How to Install the Thermo Fan Monitoring Application on the Area-51 m15x Mobile System?

Article Summary: This article provides information about installation of the Thermo Fan monitoring application.



Thermo Fan Monitoring Application Download Information


Perform the following steps to download and run the Thermo Fan monitoring application.
  1. Click ThermoFan (.EXE) to download the Thermo Fan monitoring application.

  2. Double-click the downloaded file.

  3. Click Yes on the first dialog screen (Figure 1).


    Figure 1: Area-51 m15x OSD Update

  4. Let the installation finish. Click OK on the ending dialog (Figure 2).


    Figure 2: Installation Successful

  5. To start the Thermo Fan application, click Start, click Programs, click Keyboard Manager and then click OSD Utility. Double-click on the Thermo Fan icon (Figure 3).


    Figure 3: Start Thermo Fan Application


    Figure 4: CPU DTS Temp (Click to Enlarge the Image)

    Note:
    The CPU Digital Thermal Signal (DTS) box shows the CPU temperature (Figure 4).



 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN136947

Last Date Modified: 04/05/2016 03:13 PM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.