Knowledge Base

Fuser Error or Fuser Fan Locked Error on Dell 5330dn Laser Printer


Article Summary: This article provides information on "Fuser Error or Fuser Fan Locked Error on Dell 5330dn Laser Printer".


Table of Contents:
  1. Fuser Error or Fuser Fan Locked Error on Dell 5330dn Laser Printer



1.


Fuser Error or Fuser Fan Locked Error on Dell 5330dn Laser Printer


Turn the printer off.

2. Wait 10 seconds and turn the printer on.

3. Determine if the issue still occurs.

4. If the issue recurs, Open and close the Rear Door and the Fuser Door.



5. Disconnect the rear door connector by pushing it upward, twisting it 90 degrees to the side, then pulling it through the opening.



6. Lift the fuser release tabs and then slide the fuser release lever to the right to open the fuser door



7. Close the fuser door and slide the release lever back to the left to lock it in place, then lower the fuser release tabs.

8. Replace the rear door connector and close the rear door.

9. Cycle power on the Printer once again and determine if the issue still occurs.

10. If the Fuser Door Open error is still displayed, please try another Fuser Unit from a working Dell 5330dn Laser Printer (if available).

11. If the error recurs with a working Fuser, or none is available, Please contact
Dell Technical Support for further advice.


Back to Top

Click the button below to Tweet feedback or request assistance on anything in the above article.

 


Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Article ID: SLN266007

Last Date Modified: 11/23/2015 07:32 AM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.