Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Article Number: 000127437

How to use Intel Smart Response Technology to enhance disk I/O with caching.

Summary: This article provides information about How to use Intel Smart Response Technology to enhance disk I/O with caching.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content

Symptoms

Table of Contents:

  1. Getting Started
  2. Installation Guide
  3. Fixing Problems

Intel® Smart Response Technology (ISRT) is a feature that automatically stores your most frequently used data and programs on a high performance solid-state drive (SSD) while giving you access to a large capacity hard disk drive (HDD).

Cause

Getting Started

You need to have an SSD with at least 18.6GB of space and an HDD of any size. You can also use a solid-state hybrid drive (SSHD) with at least 8GB of flash space and not need a secondary HDD.

Note: ISRT can only use up to 64GB, so you don’t need an SSD any larger, though you can always partition the extra space for other uses, including a hibernation partition for use with Intel Rapid Start Technology (IRST). See How to use Intel Rapid Start Technology to enhance disk I/O with caching for further information on IRST.

You need the most up-to-date version of the Intel Rapid Start Technology driver for your system from Dell.com/Support under Drivers and Downloads in the Serial ATA category, or alternatively from the Intel Download Center by searching for Intel Rapid Start Technology.

You also need to ensure RAID On is enabled for the SATA Operation in the BIOS.

Note: The Dell supported method of changing the SATA Operation between ATA, AHCI and RAID On is to reinstall Windows with the desired SATA Operation changed first.
Note: Please refer to Error message occurs after you change the SATA mode of the boot drive for instructions on how to change the SATA Operation without reinstalling Windows. Failure to follow these steps will result in a boot issue and data loss. Ensure you have a backup of your data before beginning, and follow the steps accordingly to avoid these issues.

Back to Top

Resolution

Installation Guide

  1. Install the Intel Rapid Storage Technology driver for your system from Dell.com/Support under Drivers and Downloads in the Serial ATA category, or alternatively from the Intel Download Center by searching for Intel Smart Response Technology.
  1. Ensure RAID On is enabled for the SATA Operation in the BIOS.
Note: The Dell supported method of changing the SATA Operation between ATA, AHCI and RAID On is to reinstall Windows with the desired SATA Operation changed first.
Note: Please refer to Error message occurs after you change the SATA mode of the boot drive for instructions on how to change the SATA Operation without reinstalling Windows. Failure to follow these steps will result in a boot issue and data loss. Ensure you have a backup of your data before beginning, and follow the steps accordingly to avoid these issues.
  1. Launch the Intel Rapid Storage Technology program from the Start Menu or Start Screen.

SLN298133_en_US__1SLN298133_001

  1. Click or tap the Accelerate icon, then Enable acceleration link.

SLN298133_en_US__2SLN298133_002

  1. Select the SSD to use for acceleration, choose the size allocated for caching memory, select the disk or volume to accelerate, and choose the mode for acceleration.
    • Enhanced mode is optimized for data protection.
    • Maximized mode is optimized for I/O performance.
Note: You do not need to partition the SSD to use the cache memory, but you need at least 18.6 GB or up to 64 GB of unallocated space for acceleration to work.

SLN298133_en_US__3SLN298133_003

  1. Click or tap OK to enable acceleration, then verify the status on the next screen.

SLN298133_en_US__4SLN298133_004

Back to Top

Fixing Problems

There are three reasons why ISRT will stop working properly. If you encounter any of these situations, you will see an error during POST for the Intel Rapid Storage Technology.

  • The operating system became corrupted and required a reinstall.
  • The HDD where the Windows operating system was installed failed and was replaced.
  • The SSD where the caching memory was configured failed and was replaced.
  1. Press CTRL+I to access the RAID Controller, which will give you the following prompt. Press R to remove the acceleration, then Y to confirm the request.

SLN298133_en_US__5SLN298133_005

 

  1. Start Windows normally then launch the Intel Rapid Storage Technology program. There will be a message on the Status page that says, "The accelerated disk or volume associated with the cache device is inaccessible, and the overall performance is no longer optimized. Please reconnect the accelerated disk or volume, or click Accelerate for more troubleshooting options."
  1. Click or tap the Accelerate icon, then Disassociate under Acceleration Configuration, and OK to confirm.

SLN298133_en_US__6SLN298133_006

  1. Click or tap Reset to available under SSD Configuration, then Yes to confirm.

SLN298133_en_US__7SLN298133_007

  1. Go to Step 4 of the Installation instructions to enable acceleration again.
Back to Top

Article Properties

Last Published Date

22 Apr 2021

Version

4

Article Type

Solution

Back to Top