Consulta de temas

How Do I Connect Audio From My Computer to a Stereo or a TV? - Technical Tip - 147322




Connect Audio From the Computer to a Stereo or a Television

To connect the analog audio output to a stereo, you will need a cable resembling the one in Figure 1.

The green circle on the top left represents the audio output jack on the sound card. The connectors on the bottom right represent the two round connectors that are located on the back of the stereo or TV. These should be labeled similar to Audio In.

To connect DVD audio out (only the DVD decoder card with TV out has analog output) to a TV or stereo you will need this type of cable as well. Just plug the cable into the DVD card audio output instead of sound card audio output. For more information on DVD connections, refer to Dell Knowledge Base Document TT1023936.

NOTE: The cable is not supplied by Dell®, but is available at most electronic supply stores.



Figure 1



 
Quick Tips content is self-published by the Dell Support Professionals who resolve issues daily. In order to achieve a speedy publication, Quick Tips may represent only partial solutions or work-arounds that are still in development or pending further proof of successfully resolving an issue. As such Quick Tips have not been reviewed, validated or approved by Dell and should be used with appropriate caution. Dell shall not be liable for any loss, including but not limited to loss of data, loss of profit or loss of revenue, which customers may incur by following any procedure or advice set out in the Quick Tips.

Identificación del artículo: SLN66990

Última fecha de modificación: 07/30/2010 12:00 AM


Califique este artículo

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
No
Envíenos sus comentarios
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
Disculpe, nuestro sistema de comentarios está actualmente inactivo. Vuelva a intentarlo más tarde.

Muchas gracias por sus comentarios.